Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who enjoys the convenience of gas cooktops but still requires an oven to bake in? Discover a dual fuel range cooker that has the best of both worlds.
Gas cooktops are the preferred choice of many home chefs with years of experience in the kitchen due to their superior temperature control. They also allow them to use advanced cooking techniques like charcoaling. These cooktops can be costly though, especially if you require an additional gas hook-up as well as an electrician for installation.
What is a 13amp plug?
If you own a dual-fuel range cooker (also known as a gas and an electric oven) you'll need an electrical outlet of 13 amps. The plug must be wired by a certified electrician to the cooker ring.
This ensures that the current passing through the plug is safe and not too high, which could result in an electrical fire danger. The plug has an electric fuse that regulates the current. The fuse explodes as soon as the current is over its capacity, which protects the appliance from an overcharge of electricity.
The fuse is rated at 13 amps, as shown on top of the plug. This is the maximum amount of current the plug can pass without damaging the appliance or heating the socket. When replacing fuses, it's essential to use the same amp rating that was used in the original. dual fuel range cooker reviews run the risk of overheating a socket when you replace a fuse that has an unrelated rating.
A 13 amp fuse is likely to be a type of ceramic, which is very durable and is able to withstand high temperatures produced by a range cooker. Ceramic elements are also fire-resistant, and is therefore a better option over other types.
There are many ways in which 13 amp plugs can be fitted. It could be wired to an existing live socket and the flex then connected to it using either a screw or a jaw-type cord clamp. The plug should be pushed firmly into place and tightened, making sure the cord clamp is secure.
Some plugs may have a diagram of wiring on cardboard over the pins. These must be removed prior to connecting the wires. It is vital that the wires are trimmed to the correct length as being too long can cause them to break when the plug cover is replaced. The earth wire should be the longest wire to ensure that it is connected before the neutral and line pins.
How do I fit a 13amp plug?
The majority of dual fuel range cookers in the UK are connected to 13 amp plug sockets and this is vital since ovens draw a substantial amount of power and the standard plug sockets are designed to handle 10 amps.
In general new appliances must be fitted with a plug at the point-of-sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug installed and this is the reason for the problem.
When connecting a cooker to an existing plug socket the first thing that needs doing is to check that the rating of the fuse in the box is the same as that of the plug's. This is very important since a faulty sized fuse could be dangerous.
It is also important to ensure that the fuse is seated in the cartridge and there isn't any movement within it. The next step is to prepare the flex that will be used. Remove the sheathing from the flex to expose the three conductors that are insulated within. Then, nick the sheathing at the entry point to the plug (beyond the cord grip) using a knife, without piercing the individual conductors. The nick should be large enough to allow the sheathing to split and expand the nick as it is pulled back, revealing the cable underneath. Finally cut off the excess sheathing and leave about 40mm over the flexing end.
The flex should be positioned over the plug with the earth terminal on the top and the neutral and live terminals on the bottom. The sheathing on each pin is removed using the coloured conductors as a guide. The internal cable is then fixed into the terminal with the help of the cord grip. If the plug has a cord clamp that is screw-type, let it loosen and then pull the insulation back to expose the copper wires. Connect each conductor that is insulated to the appropriate terminal (starting with the earth, then neutral and finally the live) by using the channel they run through in the plug.
What is the maximum draw of a 13amp plug?
The maximum current draw for the 13amp plug is 3kw at 230 volts. This is a significant amount of power, but the standard fuse fitted in a UK plugtop will not fail until the cable has reached to a dangerous temperature. A defective plug or socket may result in a fire, therefore it is important to keep an eye on how much you are using, especially in the kitchen.
The ceramic fuses used in plugtops weigh around 25mm and are rated for 240V mains. They will be marked with the BS kitemark or similar mark on the side and will contain sand. Glass or plastic alternatives are available, but they should not be used in combination with a live plug.
The majority of dual fuel range cookers in the UK require hard-wired and cannot be plugged directly into a wall socket. They are typically connected to a separate cooker ring circuit, which is only suitable for appliances that use up to 20 amps.
Check the ring circuit at your home with the fuse box, or call an electrician nearby. Ask them if the sockets are on the same ring or if they are distinct. They should also be able tell you if there is an individual circuit that powers your oven.
If you're in the market for a new dual fuel range cooker the size of your kitchen is a crucial aspect to take into consideration. We have a large choice of cookers to fit any space, from small 50-60cm dual fuel models as well as huge 90cm+ double oven options from top brands like Rangemaster and StovesAreUs.
We also have a wide variety of multifunction electric and gas cookers. These versatile machines let you cook a variety meals, including casseroles, pasta and curries.
Currys offers a variety of Cookers. Explore our online collection or stop by our store to view them. We provide free home installation and delivery on a selection of range cookers, as well as flexible payments options. Our team is on hand to answer any questions you might have. Contact us via email or phone. Credit is subject to status and terms and conditions apply.
What is the maximum draw of an appliance switch?
There is plenty of confusion over what the maximum current draw of a cooker switch is. The reality is that the majority of cookers aren't designed to plug into the standard socket, but instead are wired hard and fed into a dedicated oven ring circuit. This is because they typically consume more than 20 amps of power when both the electric oven and gas hob are being used.
So, you won't find a dual fuel range cooker that could be fitted to a standard socket because it could pose a dangerous fire hazard and is against electrical safety regulations. A licensed electrician will install any new electrics to an appliance in the kitchen and ensure that the total load (both the oven and the hob) do not exceed the capacity of supply of the circuit.
Dual fuel range cookers mix the flexibility of a gas stove and the precision and precision of an electric oven. This is the reason they are popular among cooks and chefs alike. Dual cookers that use fuel are great for trying out different cooking techniques, including searing or grilling.
When you are looking to purchase a new range cooker, you'll need to take into consideration a number of factors such as size, functionality and price. In addition, you will be required to ensure that your home is equipped with a suitable gas hook-up for the appliance. If you're not sure, it is best to make an appointment with a Gas Safe engineer to inspect your home prior to installation.
The Currys range of dual fuel range cookers offers options that can be adapted to a range of budgets, from basic models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something bit more sophisticated, we also stock a wide selection of premium JennAir models, with many innovative features.
It is crucial to read the instruction manual for the owner prior to purchasing a dual fuel range cooker. This will give you specific information regarding the electrical and gas requirements. You must ensure that your home has a suitable gas hook-up and you may have to have a plumber install this for you if it is required. You may also need an individual cooker-ring circuit installed by an experienced electrical engineer.